Welcome To TY Engineering Private Limited

TY ENGINEERING PVT. LTD.

+91 79054 59628,+91 8660249319

structure

A load-bearing structure is the first type of structure in building/civil engineering that has the components of a building that carry and transfer the load to the ground safely. This type of building structure guarantees the stability of the building and its performance. Commonly walls, columns, beams, and foundation.Structural engineering is a field of civil engineering. Structural engineering is the biggest branch of civil engineering. Load-bearing structures are used for less loading and single or double-floor structure construction work.

Block work

Laying of lightweight AAC (Autoclaved Aerated Concrete) or solid concrete blocks for internal partition or external walls as per architectural and structural drawings. Includes alignment, leveling, mortar application, and jointing.Foundation slab/chajja surface cleaned Line and level set using string, plumb bob, and spirit level Blocks pre-wetted before laying.

Plaster work

Plaster is a thin layer of mortar applied over the masonry surface and it acts as a damp-proof coat over the brick masonry work. Plastering also provides a finished surface over the masonry that is firm and smooth hence it enhances the appearance of the building.

interior paint

Removing dust, grease, and loose plaster Filling cracks and holes with putty or filler .Sanding the surface for smoothness.Applying primer where necessary to ensure good adhesionPrimer is applied on new surfaces to improve paint bonding Type of primer depends on the surface (cement, plaster, drywall, etc.)Usually one coat is sufficient.

Texture work

A worker standing on scaffolding and painting an exterior wall of a modern building. The wall has a clean, smooth finish with horizontal dark lines evenly spaced across the surface, creating a sleek and minimalistic design. The overall color scheme is mostly white with a lower section painted in a darker gray tone.

panel installation

Panels are measured and cut to size as per the layout Panels are fixed using screws, adhesives, or clips depending on panel type.Joints between panels are aligned properly to ensure uniformity.Necessary space is left for expansion, especially for wooden or PVC panelsThe base surface (wall, floor, or ceiling) is cleaned and checked for level Necessary framing (metal or wooden framework) is installed to support the panels.Electrical and plumbing provisions are completed prior to installation.

tile work

Tile work includes the supply, laying, and finishing of floor and wall tiles in bathrooms, kitchens, lobbies, terraces, and other interior/exterior surfaces. Ceramic Tiles – cost-effective and easy to clean.Vitrified Tiles – durable and water-resistant, ideal for floors.Porcelain Tiles – high strength, suitable for heavy-traffic areas.Mosaic Tiles – for decorative patterns and bathroom use Natural Stone Tiles (Marble, Granite) – for luxury finishes.

flooring work

Flooring work involves preparation of base surfaces and installation of floor finishes such as tiles, marble, granite, vinyl, wood, or concrete screed across various areas of the building (residential, commercial, or industrial).PPE like gloves, goggles, and knee pads used during cutting and laying Wet floor signs are placed to avoid slips.Edges protected until final handover.

ACP panel work

ACP (Aluminum Composite Panel) work includes the supply, fabrication, and installation of composite panels on building exteriors, signage, columns, canopies, or interior walls, as per architectural design. Aluminum Composite Panels – typically 3mm or 4mm thick.Supporting Frame – usually aluminum/galvanized iron (GI) sections.Rivets/Screws, Sealants, Tapes – for fixing and waterproofing.

wall curtain

Wall curtain work involves the supply and installation of fabric curtains or blinds on interior walls, windows, or glass partitions to provide privacy, shade, and enhance aesthetic appeal. It is commonly executed in residential, hospitality, office, and commercial interiors. Fabric Curtains: Cotton, linen, velvet, or blackout materials.Sheer Curtains: Lightweight and translucent for soft lighting.Blackout Curtains: Thick fabric to block light, ideal for bedrooms or theaters.Motorized Curtains: Remote or sensor-controlled for modern interiors.

ducting work

Ducting work involves the fabrication, installation, and insulation of duct systems for air distribution in HVAC systems. It is essential for maintaining indoor air quality, temperature control, and ventilation in residential, commercial, and industrial buildings. Duct layout is marked at the site with required supports and hangers.Ducts are joined using flanges, gaskets, and sealants to ensure airtightness

fire fighting

fire fighting work includes the supply, installation, testing, and commissioning of fire protection systems in buildings to detect, control, and extinguish fires. This system is essential for the safety of life and property in residential, commercial, industrial, and institutional projects.MS (Mild Steel) or GI (Galvanized Iron) pipes with red oxide or epoxy coating Grooved, flanged, or threaded joints used for connections.Supports, hangers, and anchors installed at specified intervals

fire alarm

Fire alarm system work involves the design, supply, installation, testing, and commissioning of an automatic system that detects fire or smoke and alerts occupants through audible and visual signals. This system is critical for life safety in residential, commercial, industrial, and public buildings.Devices are installed as per approved layout drawings, complying with IS 2189 / NFPA 72 standards Mounting heights and spacing are maintained as per design codes.Wiring is routed in conduits or cable trays with proper tagging

s.s tank installation

Stainless Steel (S.S.) tank installation involves the placement, alignment, connection, and commissioning of pre-fabricated S.S. storage tanks used for water, chemicals, or process liquids in residential, commercial, or industrial facilities.tainless Steel Grade: SS304 or SS316 (depending on usage). As per design (commonly 2 mm to 5 mm or more) Inlet/outlet nozzles, drain valve, manhole, level indicator, overflow, air vent.Civil foundation or RCC platform is constructed with adequate load-bearing capacity Anti-vibration pads or anchor bolts provided if required

deduster pipeline

Deduster pipeline work includes the design, fabrication, and installation of pipelines connected to dedusting equipment to extract and convey dust, fine particles, or contaminants from process areas to dust collectors or filters. It ensures clean air, product purity, and regulatory compliance in controlled environments. To remove airborne dust generated during material handling or manufacturing.Maintain cleanroom or process area standards

Cabel tray work

Overhead, likely perforated or ladder-type cable trays (not fully visible but typically used in cleanroom environments). Material: Likely GI powder-coated or stainless steel to comply with cleanroom standards. Purpose: To support and route power and control cables across the facility without cluttering floor space. Positioning: Installed overhead along ceiling lines (exact trays are concealed by ceiling but inferred from ceiling lighting and structure). High-lumen recessed LED panel lights installed flush in the ceiling. Likely integrated into wall panels or nearby control stations (not directly visible).

lighting work

Lighting work involves the supply, installation, wiring, testing, and commissioning of electrical lighting systems in residential, commercial, industrial, or institutional buildings to ensure proper illumination, safety, and aesthetics.LED Panel Lights Tube Lights / Batten Lights,Downlights / Spotlights,Decorative Fixtures (chandeliers, pendant lights).

panel installation commission

cable termination

Cable termination involves the proper ending and connection of electrical power or control cables to equipment such as panels, switchgear, motors, DBs (Distribution Boards), and junction boxes. It ensures safe, reliable, and efficient electrical system operation.Cable termination checklist Test reports (IR, continuity, HV if applicable).Cable schedule and as-built drawings with termination details.

rack installation

Rack installation involves setting up structured storage systems such as slotted angle racks, heavy-duty pallet racks, or cable management racks in designated areas. This ensures efficient space utilization and safe storage of materials, equipment, or cable systems.Verify the drawing/layout and identify exact rack positions. Mark drilling points on the floor for base plates using measurements and levels.

it system

Installation of IT server racks, network racks, and related equipment for organizing and securing IT infrastructure including servers, switches, routers, patch panels, and cable management systems. Inspect and prepare installation area (ensure access to power and network). Position and fix the rack on a level floor, preferably on anti-vibration pads or anchoring bolts. Install vertical rails and internal mounting brackets as per equipment size (U height).

h.v system installation

High Voltage (H.V.) system installation involves the supply, installation, testing, and commissioning of electrical systems operating at voltages above 1kV—typically between 11kV to 33kV and beyond. These systems are used to distribute power from substations to large industrial and commercial facilities. Install H.V. panels and connect busbars as per layout. Place and align power transformer on plinth with rollers or channels. Terminate H.V. cables using heat-shrink or cold-shrink kits. Connect CTs, PTs, relays, and metering units in the panels. Bond all non-current-carrying parts to the earthing system.

l.v system installation

Low Voltage (L.V.) system installation covers the installation, connection, and commissioning of electrical systems operating at voltages up to 1,000V AC, typically 230V/400V for lighting, sockets, small equipment, and general electrical distribution.Review approved electrical layouts and load schedules. Check material specs, cable ratings, and panel drawings. Ensure proper conduit routing and ceiling/wall cutouts are ready.

foundation Evacution

Evacuation planning and infrastructure are critical in cleanroom and industrial environments to ensure the safety of personnel and protection of equipment in case of emergencies such as fire, chemical leaks, or power failure.Clearly marked emergency exit routes with glow-in-the-dark floor marking tape and overhead directional signs. Anti-slip flooring along escape paths. Routes maintained obstruction-free at all times. Includes primary and secondary escape corridors depending on area size. .

pcc

PCC serves as a non-reinforced concrete base layer. Laid below structural foundations, flooring, and machinery bases to: Provide a firm, level, and clean base. Prevent direct contact between soil and RCC. Act as a moisture barrier. Help in load distribution.Excavation as per layout. Soil surface compacted with rammers/plate compactors. Anti-termite treatment if required.Concrete mixed in a mechanical mixer or transit mixer. Laid manually and compacted with vibrators. .

work reinforcecement

Reinforcement work is a critical aspect of civil engineering, providing structural strength and integrity to concrete elements. It involves placing steel bars (rebars) in specific patterns and positions within formwork before concrete is poured.Enhances the tensile strength of concrete, which is naturally weak in tension. Minimizes cracking and resists deformation under loads. Ensures durability and safety of the structure over time.

formwork

Formwork is a temporary or permanent mold into which concrete is poured and formed. It holds the concrete in place until it gains sufficient strength to support itself. Made from wood or plywood.Economical for small projects.Easy to shape but not reusable for long.Strong, durable, and reusable.Provides a smooth finish.

RCC

Reinforced Cement Concrete is concrete in which steel reinforcement (rebars, wires, or meshes) is embedded so that the two materials act together: concrete resists compression, while steel resists tension. This composite action gives RCC its high load‑carrying capacity and versatility.Cement: Ordinary Portland (OPC) or blended cements (PPC, PSC) conforming to IS codes. Fine Aggregate: Clean sand, Zone II or III as per IS 383.Coarse Aggregate: Crushed stone or gravel, well‑graded, 10–20 mm for most work.Water: Potable, free from harmful salts (≤ 500 ppm chlorides).

Shuttring

Using plywood in formwork is gaining popularity given that it presents a smooth surface that requires no further finishing treatment and can also be re-used normally . Plywood can be used to cover up the large area so that it largely reduces the labor cost of fixing and dismantling of formwork.

Steel

Using steel in formwork increases the initial cost, but in the long run, it proves to be economical as it can be re-used more times, normally ten times more than timber formwork. The further finishing treatment is less after using steel shuttering because it gives excellent exposed concrete surfaces.

Concrete

Formwork (shuttering) in concrete construction is used as a mold for a structure in which fresh concrete is poured only to harden subsequently. Types of concrete formwork construction depends on formwork material and type of structural element.

Pipe line work

Pipeline Construction means to lay the pipes to serve their intended purposes. There are two kinds of pipelines: Liquid and Gaseous. The construction of both pipelines is similar. Construction of large scale cross country pipeline involves a multitude of activities.

Chamber work

The cover of a manhole is a plug that protects the manhole from any unauthorized access. The covers used for manholes can be either rectangular, square or circular in shape. The material of cover can be precast concrete, composite material or any glass-reinforced plastic material.

Plumber work

Plumbers install and repair pipes and fixtures that carry water, gas, or other fluids in homes and businesses. They also maintain plumbing fixtures like bathtubs and toilets and appliances such as dishwashers or heating systems.

Paint work

Once putty was applied then paint quote will start. Once you finish one quote of painting electrical people will fix switches. Carpenters can start working on wardrobes and kitchen wood work. Once you finish all the works in house you can go for second quote.

Steel Work

Reinforcement Steel: High Yield Strength Deformed (HYSD) bars of grade Fe500/Fe550, conforming to IS:1786 Binding Wire: 16-gauge annealed wire for tying bars Cutting & Bending: Carried out as per bar bending schedule (BBS) and IS:2502 Spacers/Chairs: Precast cover blocks used to maintain concrete cover 3. Fabrication & Placement: Bars were cut, bent, and fabricated as per BBS Main bars and distribution bars laid in grid pattern as per design Proper overlaps, anchor.

Paint

Application of exterior-grade paint on a plastered/fiber cement panel surface using rollers to achieve a smooth and uniform decorative finish. Includes surface preparation, primer application, and final coats. Surface cleaned and dried before application Dust, grease, and loose particles removed Minor cracks and undulations filled with exterior wall putty Light sanding done to ensure smoothness.

Casting

The activity involves the placement, compaction, and finishing of concrete for a structural RCC slab over reinforced shuttering. Work includes preparation, concrete pouring, vibration, leveling, and finishing. Reinforcement checked for cover, alignment, and cleanliness Formwork and supports verified for plumb, level, and tightness Surface cleaned and wetted before casting Pour card, level markers, and cube molds arranged.

Floater

The activity involves the use of mechanical or manual floaters to level, compact, and finish freshly laid concrete surfaces. It enhances surface smoothness, compaction, and durability.o remove surface imperfections after screeding To achieve a uniform, closed, and level surface To prepare the surface for further troweling or coatingEdges finished manually where machine access is limited In case of large areas, machine floating followed by power trowel finishing .

Machine ANd air shower installation

These are double-sided air showers typically used in cleanrooms or controlled environments. The units feature multiple nozzles/blowers mounted on the interior walls, designed to blow high-velocity air to remove particulate contaminants from personnel or materials entering a clean zone. Located directly behind the air showers is a material handling or production area.A conveyor belt system Mechanical lifting arms or hoists, indicating some semi-automated process. Control panels and safety barriers (right side yellow mesh). .

Pipeline

Material: SS 304/316 or PPR (Polypropylene Random Copolymer) for clean air transport. Use: Power pneumatic tools, actuators, air curtains, or cleaning processes. Routing: Overhead with supports or concealed in wall/ceiling cavities. Fittings: Quick-connect valves, pressure gauges, isolation valves.Ensures air pressure balance in utility tanks or pipelines. Fitted with microbial filters where required.

Top

Services